Table of Contents
Advertisement
Parameter/
Explanation
Value
OUT POSITION (Output position)
This specifies which signal of the BR-800 will be output
via USB.
* In Control Surface mode, the signal as it is immediately
after passing through the [REC LEVEL] knob will be
output.
The signal as it is immediately after pass-
MASTER
ing through the [MASTER] fader will be
output.
The signal as it is immediately after pass-
ing through the [REC LEVEL] knob (i.e.,
the signal being recorded on the BR-800)
will be output.
REC LEV
* When "INPUT 1–4" has been set for
INPUT SELECT (p. 37), only the signals
for INPUT 1, 2 will be output.
Making Settings for USB Functionality
129
Advertisement
Table of Contents
