Advertisement
Functions
Comfortable operating functions, such as SmartUI, and a
host of system functions are included in this compact,
lightweight (approximately 2.8 kg (6.2 lb)) body.
The Lightest 2/3-type Shoulder-type Model
The AG-HPX600 is the lightest* in its class at approximately 2.8 kg
(6.2 lb) for the main unit. This compact body provides superb mobility.
It is also designed with excellent forward visibility.
* As a 2/3-type shoulder-type HD camera recorder (as of August 2012).
Low Power Consumption
Power consumption for the main unit is only 18 W. This is a reduction of
about 50% from our previous model, the AJ-HPX2100 (36 W for the main
unit only, with LCD off), which was released in 2007. The AG-HPX600
consumes only 22 W even with the optional AG-YDX600G Video Encoder
Board and optional AG-YA600G HD/SD SDI Input Board mounted.
SmartUI — A New User Interface
This newly designed user interface consists of an LCD and a variety of
switches. A large number of functions, including Scene File settings,
Audio Level settings, Audio IN/OUT selection, Time Code settings, and
MON/HDMI Output Video settings, are easy to recognize and can be set
with only a few steps each.
Versatile Shooting Assist Functions
• Focus Assist: Press the Focus Assist button to expand the center
section of the viewfinder screen for easier focusing.
• Scene Files: Select either of six preset files from the menu according to
the shooting situation. The settings can also be stored onto an SD card.
• Gain: There is a three-position gain selector with a maximum gain
value of +18 dB.
• User Buttons: Functions can be freely allocated to the three User buttons.
• Shockless White Balance: A smooth transition occurs when switching
White Balance modes. This is effective, for example, when moving from
outdoors to indoors.
• WFM: Simplified waveform and vectorscope display.
• Zebra: Select any two levels from among 50% to 109%, in 1% steps.
• Mode check: Displays a list of the camera settings.
• Y-GET: Measures brightness at center and displays numerical data.
• Auto White Balance with an auto tracking white function.
• User files can be saved to an SD card and shared with
other cameras.
• Audio input level adjustment (front) can be switched on/off
and allocated to desired channels.
New Color LCD Viewfinder
The newly designed, optional
AG-CVF10G Color HD
Viewfinder (cost-effective
model) and AG-CVF15G Color
HD Viewfinder (upper grade
model) are 8.76 cm
(3.45 inches) color LCD with
approximately 920,000-dot
resolution and a 16:9 aspect
ratio. When opened, it serves
as an LCD monitor. The
optional 5.08 cm (2 inches)
AJ-HVF21G Monochrome HD
Viewfinder can also be used.
3
Waveform (The above photo is AG-CVF10G)
A large number of functions can be quickly set on the "SmartUI".
Camera Remote System Compatibility
• 10-pin Remote Terminal: Camera remote operation is enabled with
the optional AG-EC4G Extension Remote Control Unit or AJ-RC10G
Remote Control Unit.*
• Camera Studio System: The optional camera extension system
(AG-CA300G Camera Adaptor and AG-BS300 Base Station) support
low-cost studio integration.
* Only functions that are supported by the AG-HPX600 can be controlled.
HD SDI IN/OUT, HDMI OUT
• SDI OUT (IN): It outputs SDI with embedded audio. Backup recording
operation can be interlinked with the Rec Start/Stop controls of an SDI
input-equipped Panasonic recorder, such as the AG-HPD24. Adding the
optional AG-YA600G HD/SD SDI Input Board makes it possible to switch
SDI input with this terminal, for line recording.
• HDMI OUT: This terminal allows digital A/V output to a wide range of
devices with both professional and consumer specifications.
• MON OUT: This terminal outputs separate from the SDI OUT terminal.
It can also be set to output HD SDI, down-converted SD SDI, or VBS.
• Aspect conversion: The aspect ratio can be selected to Side Crop,
Letter Box, or Squeeze mode when down-converting and outputting from
SDI OUT/MON OUT terminals.
Other Interfaces
• TC IN/OUT: A built-in SMPTE time code generator/reader. IN/OUT
selectable by menu settings.
• GENLOCK IN: For synchronized recording with a multi-camera system.
• USB 2.0: Equipped with both HOST (for connection to an HDD) and
DEVICE (for connection to a PC/Mac) terminals.
• UniSlot® compatible wireless receiver slot (2 channels).
• XLR audio input: 2-channel mic/line inputs supporting 48V phantom
power supply.
• Audio output terminals (pin jacks), 2 channels.
• Multiple battery support, including Anton Bauer.
Rear Terminal
* UniSlot® is a trademark of Ikegami Tsusinki Co., Ltd.
Audio Output (Right Side)
USB Terminal Left Side)
Advertisement
