Wheel Assembly - Chicago Electric 97360 Operating Instructions Manual

in the Right Rail Stand (41) and into
the threaded hole as shown.
4. Repeat for the Left Rail Stand
(24) and the other Knob (22).
5. Secure Knobs.

Wheel Assembly

FIGURE 7A
Washers (121)
Hex Nuts (123)
Bolts (120)
Wheels (126)
FIGURE 7B
1. The Wheels (126) are connected
to the Stand II (64) using Bolts
(120), Hex Nuts (123) and Washers
(121). (See Figures 7A-7E)
SKU 97360 For technical questions, please call 1-800-444-3353.
Note: Bolts should be inserted from
outside, through the leg stand and into the
wheel. Washers and Nuts to be placed
onto the Bolts from the wheel side.
Stand II (64)
2.
FIGURE 7C
FIGURE 7D
FIGURE 7E
Lift the saw stand with the front handle
to move it, as shown in figure 7E.
Hex Nuts (123)
Page 10