Using Infant Restraint; Positioning Harness Straps - Graco Multi-Stage Lightweight Stroller Owner's Manual

Multi-stage lightweight stroller
Table of Contents

Advertisement

Available languages

Available languages

7.0 Using Infant Restraint

7.1 Positioning Harness Straps

FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS FOR
YOUR CHILD INCREASES THE RISK OF SERIOUS INJURY OR
DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP, OR
CRASH. The harness straps must be properly adjusted to fit your child
according to the following instructions.
1. Remove infant restraint
from base and rotate handle
down to sitting position.
See "5.1 Adjusting Handle" and
"5.2 Removing and Attaching
Infant Restraint", page. 23.
2. Place child in seat as shown
3. Determine which pair of harness slots are even
with or just below your child's shoulders
4. If the harness straps must be
adjusted: remove child from infant
restraint and move harness straps
to the proper harness slots by doing
the following:
.
.
even with or just below
35
Use harness slots
child's shoulders

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Modes click connect

Table of Contents