To Select A Desired Channel - Hitachi VT-MX4430A Owner's Manual

Hitachi owner's manual video deck vt-mx4430a

Table of Contents

SET UP FOR USE

• Use the remote control for this procedure.

4 Select 'ENGLISH" or "ESPANOL"

Select "ENGLISH" or "ESPANOL"=Spanish by using the PLAY/

press the MENU or F.FWD/

NOTE: This function effects only the language on the screen menu and not the audio source.

5 Begin Channel preset

Press the F.FWD/

area.

• The VCR distinguishes between standard TV channels and cable channels.

6 After scanning

The tuner stops on the lowest memorized channel. The TV screen returns to TV mode.

• If "TUNER SET UP'. appears on the TV screen again, check the cable connections. Press

the MENU, F.FWD/

TO SELECT A DESIRED CHANNEL

You can select the desired channel by using the CHANNEL(CH)

pressing the number buttons on the remote control.

Note for using the number buttons:

• When selecting cable channels which are higher than 99, press the + 100 button first, then

press the last two digits. (Example: to select channel 125, first press the +100 button then

press "2" and "5").

button.

LANGUAGE SELECT

   E NGLISH

[ON]

ESPANOL

button once. The tuner scans and memorizes all active channels in your

TUNER SET UP

or REW/

button once again and the VCR will begin preset again.

CH 01

or STOP/

button. Then,

button or directly

Table of Contents