To Check A Pair Of Channel Numbers - Hitachi VT-MX4430A Owner's Manual

TIMER RECORDING
4 Enter a user channel number (USER CH.)
Press the number buttons or the PLAY/
you want to enter appears. (Example:50)
• You can select following user channels.
TV mode: channels 02 - 69 and L1 position*
CATV mode: channels 01 - 125 and L1 position*
[* To select line input for the user channel number (USER CH.), press 0, 0 on the remote
control to select the L1 position.]
• Press the REW/
• When selecting cable channels which are higher than 99, press the +100 button first, then
press the last two digits using the number buttons.
5 Memorize a guide channel number and a user channel number you have selected
Press the MEMORY button.
• To set another, repeat steps [3] to [5].
6 Exit the guide channel set up mode
Press the RESET/EXIT button.

TO CHECK A PAIR OF CHANNEL NUMBERS

A list of all the GUIDE CH. numbers and corresponding USER CH. numbers memorized by the
VCR is displayed on the TV screen.TO CORRECT A PAIR OF CHANNEL NUMBERS
1 Select "INITIALIZE"
Press MENU button until the INITIALIZE menu appears.
GUIDE CH 25
USER CH. --
button to go back one step from current step.
GUIDE CHANNEL SET
GUIDE CH 25
USER CH. 50
INITIALIZE
CHANNEL SET UP
SETTING CLOCK
LANGUAGE SELECT
GUIDE CHANNEL SET
GUIDE CHANNEL MAP
or STOP/ button until a user channel number
53