Hitachi VT-MX4430A Owner's Manual page 16

OPERATING CONTROLS AND FUNCTIONS
17.INDEX SEARCH button- Index Search mode. For more information, please read page 21.
(only on the remote control)
18. PAUSE button- Press to temporarily stop the tape during recording or to view a still
picture during playback. (only on the remote control)
Frame Advance function- Press to advance the picture by one frame at a time during the still
mode. (only on the remote control)
19. SLOW button- Press to start slow motion playback. The slow speed can be controlled by
pressing the F.FWD button (faster) or the REW button (slower). (only on the remote control)
20. COUNTER MEMORY button- Press to set counter memory on and off. (only on the
remote control)
21. COUNTER RESET button- Press to reset counter to 0:00:00. (only on the remote control)
EXIT button- Press to exit the menus on the TV screen. (only on the remote control)
22.VCR/TV button- Press to select TV or VCR mode. (only on the remote control)
VCR position: to view playback, to monitor video recordings or watch TV using the VCR tuner.
TV position: to watch TV or to view one program while recording another.
23. VCR Plus+ button- Press to program the automatic timer recording using the VCR Plus+
system. (only on the remote control)
24. Power cord- Connect to a standard AC outlet (120V/60Hz)
25. AUDIO OUT jack- Connect to the audio input jack of your audio equipment or another
VCR
26. AUDIO IN jack- Connect to the audio output jack of your audio equipment or another VCR.
27. ANT. IN terminal- Connect to an antenna, Cable system or Satellite system.
28. VIDEO OUT jack- Connect to the video input jack of your video camera or another VCR.
29. VIDEO IN jack- Connect to the video output jack of your video camera or another VCR.
30. CH3/CH4 selector switch- Use to select a video output channel (3 or 4) for VCR
playback.
31. ANT. OUT terminal- Connects to the antenna input terminal on your TV.
16