To Select A Desired Channel; Setting The Clock - Hitachi VT-FX601A Owner's Manual

PRESET FOR USE
• The VCR distinguishes between standard TV channels and cable channels.
7 After scanning
The tuner stops on the lowest memorized channel. The TV screen returns to TV mode.
• If "TUNER SET UP" appears on the TV screen again, check the cable connections.
Then, press MENU, F.FWD/
again.

TO SELECT A DESIRED CHANNEL

You can select the desired channel by using CHANNEL
pressing number buttons on the remote control.
Note for using number buttons:
• When selecting cable channels which are higher than 100, press +100 button first,
then press the last two digits. (To select channel 125, first press "+100" button then
press "2" and "5").
• You must precede single-digit channel numbers with a zero (For example: 02, 03, 04
and so on).

SETTING THE CLOCK

Set the clock accurately for proper automatic timer recording. We suggest that you use
a TV or radio station as your time source.
In the example below, the clock is to be set to:
DATE
SETTING TIME
CH 01
TUNER SET UP
CH 02
or REW/
1st March, 1997
5:40PM
button once again. The VCR will begin preset
or
- 16 -
button or directly