To Change Clock Setting - Hitachi VT-MX4430A Owner's Manual

SET UP FOR USE
6 Select the minute
Press the PLAY/
(Example: 40)
Then, press the F.FWD/
7 Select "AM" or "PM"
Press the PLAY/
(Example: PM)
8 Start the clock
Press the RESET/EXIT or F.FWD/
Although seconds are not displayed, they begin counting from 00 when you press the
RESET/EXIT or F.FWD/
time.
• When unplugging the AC-cord or if there is a power failure for more than 30 seconds, you
may have to reset the clock.
• If the display shows an abnormal reading or no reading, unplug the power cord for more than
30 seconds. Then plug it back in. And reset clock.

TO CHANGE CLOCK SETTING

1 ) Press the MENU button until the INITIALIZE menu appears.
2) Press the PLAY/
F.FWD/ button.
HOUR MINUTE
05-- : --
or STOP/ button repeatedly until your desired minute appears.
button.
03/01
HOUR MINUTE
05 : 40
or STOP/ button to point to "AM" or "PM"
03/01
HOUR MINUTE
05 : 40
button.
button. Use this feature to synchronize the clock with the correct
or STOP/ button to point to "SETTING CLOCK". Then, press the
SETTING THE CLOCK
MONTH DAY
SETTING THE CLOCK
MONTH DAY
AM/PM
--
YEAR
MON1999
AM/PM
--
YEAR
MON1999
AM/PM
PM AM
PM
27