Table of Contents
Advertisement
SPECIAL PLAYBACK
5 After Index Search
When the preset program is reached, the VCR will start playback automatically.
• A video cassette must be inserted in the VCR for this function to work
• The number of Index Searches can be set up to 20.
• This function will not operate in the recording mode.
• When you want to cancel the Index Search while in progress, press the STOP button.
QUICK-FIND
This function enables you to search and confirm the contents of the recorded program(s) using
the index mark.
The VCR begins fast forwarding by selecting this function. When the VCR find the beginning of
the program (=the index mark), the VCR begins playback video tape at high speed for 30
seconds. Then, return to fast forwarding again to the beginning of next program. The VCR
repeats these operation to the tape end.
Concerning the index mark, please see "INDEX SEARCH" section.
· Tape must be fully rewound.
· You can begin the Quick-Find by pressing the QUICK-FIND button on the remote
control. You can also begin the Quick-Find by the following procedure.
1 Select "SEARCH SELECT"
Press the MENU button until the SEARCH SELECT menu appears.
SEARCH SELECT
QUICK-FIND
INDEX SEARCH
TIME SEARCH
2 Select "QUICK-FIND"
Confirm "QUICK-FIND" is pointed to, then press the F.FWD/
button. The VCR begins the
Quick-Find.
TO SKIP TO THE BEGINNING OF NEXT PROGRAM
Press the QUICK-FIND button on the remote control.
TO VIEW AT NORMAL SPEED
Press the PLAY button. The Quick-Find is cancelled.
· A video cassette must be insert in the VCR for this function to work.
· This function will not operate in the recording mode.
· When you want to cancel the Quick-Find while in progress, press the STOP button.
· When the end of a tape is reached during the Quick-Find, the tape will automatically rewind to
the beginning. After rewinding finishes, the VCR will eject the tape and turn itself to off.
37
Advertisement
Table of Contents
