Remote Control Operation; How To Use The Remote Control - Hitachi VT-M291A Owner's Manual

REMOTE CONTROL OPERATION

REMOTE CONTROL OPERATION
You can operate most of your VCR's functions from the Remote Control (included). The
buttons on the Remote Control have the same functions as the corresponding buttons
on the VCR.

HOW TO USE THE REMOTE CONTROL

See Remote Control Diagram.
1 POWER button-Press to turn VCR on and off. Press to activate the automatic timer
recording.
2 MENU button-Press to display main menu on the TV screen.
3 SELECT button-Press to select setting modes (TIMER PROGRAMMING, CHANNEL
SET UP, SETTING CLOCK, RENTAL, etc) from menu.
4 TAPE SPEED button-Press to set desired recording speed. (SP/LP/SLP)
5 MUTE button-Press to mute the TV's sound. Press it again to resume the sound.
6 ADD/DELETE button-Press to add or delete channel numbers. Press to cancel a
timer program.
7 VOL button-Press to adjust the desired TV's volume level by using either (up) or
(down) button.
8 PLAY button-Press to playback the tape.
9 REW button-Press to rewind the tape or to view the picture rapidly in reverse during
playback. (Rewind Search)
10 STOP button-Press to stop the tape motion.
11 REC button-Press to begin manual recording.
16