1. Connecting the video recorder
Preparing the remote control for
operation
The remote control and its batteries are packed separately in
the original video recorder packaging. You must install the
batteries in the remote control before use - described in the
following section.
1 Take the remote control and the enclosed batteries (2
batteries).
2 Open the remote control's battery compartment and place
the batteries in it as shown in the picture and close the
battery compartment.
The remote control is now ready to use. Its range is
approximately 5 metres.
Connecting your video recorder to
the TV set
The necessary cable connections must be made before you
can record or playback TV programmes using your video
recorder.
We recommend that you use a scart cable to connect your TV
set and video recorder.
What is a scart cable?
The scart or Euro AV cable serves as the universal
connector for picture, sound and control signals. With this
type of connection, there is practically no loss of quality
during the picture or sound transfer.
When you install your video recorder for the first time, select
one of the following options:
'Connecting with a scart cable'
If your TV set has a scart socket and you are using a scart
cable.
'Connecting without a scart cable'
If you do not wish to use a scart cable.
4