Irt (Instant Recording Timer) - Hitachi VT-M291A Owner's Manual

IRT (INSTANT RECORDING TIMER)

IRT (INSTANT RECORDING TIMER)
The Instant Recording timer function enables you to record a program simply by
pressing IRT button on the VCR. According to the table, simply press IRT button as
many times as needed to set the desired recording length. The channel number to be
recorded and recording length will be shown on the display.
1
Turn on the VCR.
2
Set the VCR to the channel to be recorded.
3
Press IRT button.
Recording starts immediately when the IRT button is pressed, whether if you are
watching the same or a different channel. the recording length will be determined by the
number of times you press IRT button.
IRT Length Diagram
Each time you press IRT button, you will extend the recording time by 30 minutes at a
time up to 8 hours (or to the end of the tape).
When IRT button is pressed 18 times, the VCR will switch to the Stop mode
immediately and the VCR power will be turned off
To stop the IRT operation, press STOP button.
The recording length time remaining is indicated on the display as the recording is
started.
55