Controlling Your Tv With The Vcr's Remote Control; Programming The Remote Control - Hitachi VT-M291A Owner's Manual

CONTROLLING YOUR TV WITH THE VCR'S REMOTE CONTROL

CONTROLLING YOUR TV WITH THE VCR'S REMOTE CONTROL
This Hitachi remote control can be used with your TV as well as the VCR, as long as
you TV comes with a remote control. This feature comes in handy--you don't have to
juggle two remotes.
The remote control is compatible with the fifteen makers of TVs listed below--but don't
be alarmed if yours is not on our list. You may still be able to program the remote for
your TV.
Every TV that comes with a remote control is set up to detect certain infrared signals.
You need to program the VCR's remote control to send signals that your TV will
recognize and respond to. Here's what to do:
Compatibility
The remote control is designed to be operated with many televisions and cable
converters, but will not work with every one made. If your TV or cable box does not
respond the way is should when you program if as explained below, this remote may be
incapable of operating it.
Once you hae programmed the remote, you won't have to do it again until you
change the batteries.

PROGRAMMING THE REMOTE CONTROL

1
Turn your TV on (any channel is okay).
2
Aim the VCR's remote control at your TV set. Hold down the TV button (not the
VCR/TV button) while you press the number corresponding to your brand of television
as shown in the chart.
For example;
If you have an RCA television, press TV and 0 at the same time. If this button
72