Playback - Hitachi VT-M291A Owner's Manual

PLAYBACK

PLAYBACK
1
Turn on the TV and set the TV channel to the same video output channel as located on the back
of the VCR. (CH 3 or 4)
2
Insert a tape. VCR will automatically turn on. Press PLAY button.
(If the erase-protection tab has been removed, the VCR will start playback automatically.)
3a
If a tape is already in the VCR, press PLAY button on the VCR. Power will turn on and
playback will start automatically. (Direct Button Operation)
3b
If a tape is already in the VCR, press POWER button to turn on, and then press PLAY
button on the remote control.
4
Press STOP button when playback is completed.
59