Adding Preset Channels - Hitachi VT-M291A Owner's Manual

CHANNEL MEMORY PROGRAMMING (Without a Cable Box)

ADDING PRESET CHANNELS

1
Press MENU button on the remote control. Select item 3 (INITIALIZE) with number buttons.
2
Select item 1 (CHANNEL SET UP) with number buttons.
3
Select item 3 (ADD/DELETE CH) with number buttons.
4
Enter the desired channel using the number buttons. The channel flashes.
You must precede single-digit channel numbers with a zero (02,03,04 and so on).
5
Press ADD/DELETE button so that "ADD" flashes on the display. The channel is added to the
VCR.
31