Connecting Your Video Recorder; Placing The Batteries In The Remote Control; Connecting Your Video Recorder To The Tv Set; Connecting With A Scart Cable - Hitachi VTMX910EUK Operating Instructions Manual

1.

CONNECTING YOUR VIDEO RECORDER

Placing the batteries in the remote control

1
Open up the battery compartment of your remote control
and place the batteries in it as shown in the picture.
2
Close the battery compartment.
Connecting your video recorder to the
TV set
We recommend the use of a scart cable. This will give you the
best picture and sound quality.
If you install your video recorder for the first time, select one of
the following options:
•

'Connecting with a scart cable'

If your TV set has a scart socket and you are using a scart
cable.
• 'Connecting without a scart cable'
If you are not using a scart cable.
Connecting with a scart cable
1
Switch off the TV set.
2
Remove the aerial cable plug from your TV set and insert
it into the socket at the back of the video recorder.
2
3
Plug one end of the aerial cable provided into the
socket on the video recorder and the other end into the
aerial input socket on your TV set.
4
Plug one end of a scart cable into the
socket at the back of the video recorder and the other
end into the suitable scart socket on your TV set (see
instruction manual TV set).
5
Switch on the TV set.
6
Insert one end of the mains cable into the mains socket
at the back of the video recorder and the other end
4
into the wall socket.
7
If your TV set automatically switches to programme
number e.g.: 'EXT', '0', or 'AV', this text will appear on the
TV screen:
CONGRATULATIONS
YOU NOW OWN A NEW
VIDEO RECORDER
Note: If your TV set does not switch to programme number
e.g.: 'EXT', '0', or 'AV' automatically, select the programme
number for the video recorder manually (see instruction
manual TV set).
8
Then, read the paragraph 'Initial installation' in the
chapter 'INSTALLING YOUR VIDEO RECORDER'.
3
scart
AV1 EXT1
CONTINUEpOK
3