Electronic Clock - Maytag CRG8200B Manual

Table of Contents

Advertisement

ELECTRONIC
CLOCK
The electronic clock and timer on your Maytag range
3. Press and hold the MINUTE pad to set the correct
will flash 12:00 when power is first supplied to the range
minutes. To change the time by a single minute, give
or if there is a power failure. Once the time-oGday clock
the pad a short tap.
has been set, the display will stop flashing.
For example: to set the clock for 8:I5, press and
Tile folloMng pads are found on ),our Maytag electronic
hold the HOUR pad until 3 appears in the hours
clock:
display. Then press and hold the MINUTE pad until
Clock
Pad
15 appears in the ininutes display.
This pad is used to set tile time of day or to display the
Timer
current time when the timer is functioning.
To set the timer:
Timer
Pad
1. Press the TIMEB
pad. 0:59 (or one hour) will
The timer call be set from 1 minute to 1 hour and 59
appear in the display.
minutes (or two hours). It will count do_
by minutes.
The timer will automatically begin counting down in
increments of one minute.
Hour
Pad
2. To set timer for less time, press tile TIMER
pad
This pad is used to set the hours for the clock mid timer,
then press and hold the MINUTE
pad until the
Minute
Pad
desired time appears in the display.
This pad is used to set the minutes for the clock and
3. To set timer for more than one hour (two hours is
the maximum
time that can be set), press the
timer.
TIMER pad then press the FLOUR pad. l:59 (or two
hours) will appear in the display:
Setting
the Clock
and Timer
Press the MINUTE
pad nntil the desired minntes
Clock
appear in the display.
To set the time-of-day
clock:
When all the time has elapsed, 0:00 will appear in the
display and continuous beeps will sound indicating the
1. Press the CLOCK pad.
timer has counted
down. Press the CLOCK pad to
2. Press and hold the HOUR pall to set the correct
cancel the beeps. The current time of day will reappear
hours.
To change
the time by a single hour, give the
in the display.
pad a short tap.
To cancel the timer:
press the CLOCK pad and the
display" will retm'n _othe current time of day;
PAGE 4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crg7500aCrg7400b

Table of Contents