Heat Settings - Maytag CRG8200B Manual

Pan Size
On electric cooktops, match the size of When canning, use the High setting
the pan to the coil element or indicated just until the water comes to a boil or
cooking area. ldeally, the pan should not pressure is reached in the pressure
extend more than 1/2-1" over the cook- canner, then reduce to the lowest heat
ing area on ceramic glass cook-tops and setting that maintains the boil or pres-
notmorethan2"beyondtheelementon sure. If the heat is not turned down,
coil eooktops. Avoid using small pans the cooktop may be damaged.
on large elements to reduce energy loss
and for safety reasons. For more information on canning pro-
cedures, contact your local county Ex-
On gas cooktops, adjust the burner tension Office.
flame so it does not extend beyond the
edge of the pan. This is for safety Heat
Settings
reasons and also to save energy.
It is better to select a lower setting and
Do not use oversized pans or pans that increaseto a higher one later if needed.
rest across two elements or burners. There are many factors that affect the
These may transfer heat to the porcelain choice of the heat setting.
cooktop which causes cracking or chip-
ping. Likewise, on ceramic glass
cooktops oversized pans (more than 1"
beyond indicatedcooking area) lengthen
cooking times.
Home Canning
Recommendations
Acceptable water-bath or pressure can-
ners should not be oversized and
should have flat bottoms. When can-
ners do not meet these standards, cook-
ing times may be extended and Keepinmindthatfooddeesnotcook
cooktops may be damaged. For best anyfasteratahighersettingorflame
results, use a canner not more than 1" size than that which maintains a
larger than the cooking area on a co- gentle boil. Water boils at the same
ramic glass surface and not more than temperature, whether boiling vigor-
2" larger than a coil element or gas ously or gently. If too high a setting
burner, is used, food may burn on the bot-
tom before it is completely cooked.
5