Range Control Panel; Electronic Clock And Oven Control - Maytag CRE9830BCE Owner's Manual

RANGE CONTROL PANEL
Styling may differ depending on the model you selected.
Electronic Clock and Oven Control
The electroi_ic clock and oven control on your Maytag
range is used for the time-of-day clock, timer, bake,
convection bake, broil, programmed oven operatior_s
and self-clean fimctions. A beep will sound each time a
function pad is pressed.
The display on the control will flash when power is first
supplied to the range or if there is a power failure. Once
the time-of-day clock has been set (see Setting the
Clock, page 6), the display will stop flashing.
The oven w411 automatically turn off if it is left on
for 12 hours.
The following pads are found on your Maytag
electronic clock and oven control:
Cancel Pad
Press this pad to eanceI 'all operations except the time-
of-day dock and timer. If you are ever unsure if you've
programmed the contro! correctly; press the CANCEl,
pad and st_n't over.
Clock Pad
Use this pad to set the time-of-d_, clock. See page 6 for
instructions on setting the clock.
You may also press this pad to recall the current time of
day. For example, if the timer is counting down in the
display, press the CLOCK pad to return the current
time to the display. The timer will eontinue to count
down aud a signal will sound when the time expires.
PAGE 5