Replacing The Staple Cartridge In The Finisher - Sharp MX-B381 Maintenance & Safety Manual Maintenance & Safety Manual Aintenance & Safety Manual

REPLACING SUPPLIES AND MAINTENANCE

Replacing the staple cartridge in the finisher

When the staple cartridge runs out of staples, a message will appear in the
operation panel. Follow the procedure below to replace the staple cartridge.
Open the cover.
1
While pressing the lever over to the left, slide the
finisher to the left until it stops.
Gently slide the finisher until it stops
2
Lower the staple case release lever and remove
the staple case.
Pull the staple case out to the right.
3
30