Sharp MX-B381 Maintenance & Safety Manual Maintenance & Safety Manual Aintenance & Safety Manual page 27

Digital multifunctional system

Hide thumbs Also See for MX-B381:

Table of Contents

Hold the developer cartridge with one hand and

slowly remove the seal with the other hand.

Slowly pull the seal straight and horizontally out.

If excessive force is used or the seal is pulled out diagonally, it may tear.

There is a mark (red belt) on the end of the seal. After removing the

seal, be sure to verify that the mark (red belt) is on the end of the seal.

If the seal has been cut on the developer cartridge, the cartridge cannot

be used. Replace with a new developer cartridge.

Close the main charger cover and rotate the lock

levers in the direction of the arrows to lock the cover.

When the lock levers are vertical, the cover is locked.

REPLACING SUPPLIES AND MAINTENANCE

Table of Contents