Remove the protective material from the drum
cartridge and slowly insert the drum cartridge
along the guides.
Make sure that the
on the machine as you insert the drum cartridge.
3
• To remove the protective material, slowly pull it straight out so that it
does not tear.
• When installing the drum cartridge, do not touch or damage the drum.
This may cause a failure.
• After removing the protective material, immediately insert the drum
cartridge in the machine. Do not allow the drum cartridge to be directly
exposed to sunlight or electric light.
• Do not tilt the drum cartridge or insert it in the wrong direction or
orientation. This may damage the drum cartridge or cause a failure.
Replace the developer cartridge and toner
collection container, close the front cover of the
machine, and turn on the power.
4
For the procedure for replacing the developer cartridge and toner collection
container, see steps 7 to 8 and steps 10 to 11 of "Replacing the developer
cartridge" (page 18).
REPLACING SUPPLIES AND MAINTENANCE
mark on the drum cartridge is aligned with the
Drum
mark
29