Selecting The Language; Normal Playback - Hitachi VT-FX601A Owner's Manual

PRESET FOR USE
3) Press PLAY/
4) Press F.FWD/
memorized channel.

SELECTING THE LANGUAGE

If you want to change the language on the TV screen, follow the steps below:
1) Press MENU button repeatedly so that the INITIALIZE menu appears.
2) Press PLAY/
Then, press F.FWD/
3) Select "ENGLISH" or "ESPAÑOL=Spanish" using PLAY/
4) Press MENU button to return to TV mode.

NORMAL PLAYBACK

Make sure...
• Turn on the TV and set the TV channel to the same video output channel as located
on the back of the VCR. (CH 3 or 4)
• Press VCR/TV button so that the VCR/TV indicator on the VCR comes on.
1 Insert a prerecorded tape
Counter mode appears at counter 0:00:00 on the TV screen. If the erase-protection tab
has been removed, the VCR will start playback automatically.
or STOP/ button repeatedly to point to "TV" or "CATV".
CHANNEL SET UP
TV [ON]
CATV
ADD/DELETE CH
once or twice. After scanning, the tuner stops on the lowest
or STOP/ button repeatedly to point to "LANGUAGE SELECT".
button.
LANGUAGE SELECT
ENGLISH [ON]
ESPAÑOL
- 22 -
or STOP/ button.