Channel Set Up Again; Selecting The Language - Hitachi VT-MX4530A Owner's Manual

5
Delete it from memory
Press the F.FWD/ or REW/
• To delete another channel, repeat steps [4] and [5]
• If you press F.FWD/ or REW/
- DELETED -
- MEMORIZED -
6 Exit the preset mode
Press the RESET/EXIT button on the remote control to return to TV mode.
NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL(CH)

CHANNEL SET UP AGAIN

Remember: If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on page 12, you DO NOT
have to set up the channels. Just select the TV and VCR to channel 3 or 4 and also have theCH3/CH4 switch on the
back of the VCR to match the channel you selected (CH 3 or CH 4). Now select the Box to the channel you wish to
view or record.
• Use the remote control for this procedure.
1) Press the MENU button until the main menu appears.
2) Press the PLAY/ or STOP/
3) Confirm "AUTO SET UP" is pointed to, then press the F.FWD/
lowest memorized channel.
• The VCR distinguishes between standard TV channels and cable channels.

SELECTING THE LANGUAGE

If you want to change the language on the TV screen, follow the steps below:
Note: This function effects only the language on the screen menu and not the audio source.
• Use the remote control for this procedure.
1) Press the MENU button until the main menu appears.
2) Press the PLAY/ or STOP/
F.FWD/ button.
3) Select "ENGLISH" or "ESPANOL"= Spanish by using the PLAY/
4) Press the RESET/EXIT button to return to TV mode.
NOTE: If for some reason the menu is in Spanish, press MENU button until the main menu appears, press
PLAY/ button to point to "SELEC.IDIOMA", press the F.FWD/ button, press the PLAY/
to point to "ENGLISH", then press the RESET/EXIT button.
button so that "DELETE" flashes on the TV screen.
button again, the channel is memorized again.
MANUAL SET UP
CHANNEL 30 [TV]
DELETE
button to point to "CHANNEL SET UP". Then, press the F.FWD/
button to point to "LANGUAGE SELECT". Then, press the
MANUAL SET UP
CHANNEL 30 [TV]
ADD
or
button. After scanning, the tuner stops at the
CHANNEL SET UP
AUTO SET UP
MANUAL SET UP
or STOP/
button.
button.
button.
button