Table of Contents
Advertisement
PREPARATION FOR USE
• Use the remote control for this procedure.
1) Press MENU button repeatedly so that the INITIALIZE menu appears.
2) Confirm "CHANNEL SET UP" is pointed to then, press F.FWD/
3) Confirm "AUTO TUNING" is pointed to, then press the F.FWD/
memorized channel.
• The VCR distinguishes between standard TV channels and cable channels.
SELECTING THE LANGUAGE
If you want to change the language on the TV screen, follow the steps below:
Note: This feature WILL NOT change the audio (sound) coming out of the VCR only the screen menu.
• Use the remote control for this procedure.
1) Press MENU button repeatedly so that the INITIALIZE menu appears.
2) Press
/PLAY or
3) Select "ENGLISH" or "ESPAÑOL"=Spanish by using the
4) Press the RESET/EXIT button to return to TV mode.
NOTE: If for some reason the menu is in Spanish, press the MENU button until "PARA INICIAR" menu appears, press the
/PLAY button to point to "SELEC.IDIOMA", press the F.FWD/
"ENGLISH", then press the RESET/EXIT button.
CHANNEL SET UP
AUTO TUNING
ADD/DELETE CH
/STOP button repeatedly to point to "LANGUAGE SELECT". Then, press F.FWD/
LANGUAGE SELECT
ENGLISH
[ON]
ESPAÑOL
button.
button. After scanning, the tuner stops at the lowest
/PLAY or
/STOP button.
button, press the
button.
/PLAY button to point to
23
Advertisement
Table of Contents
