Chapter 1 General Description; Standard Features - Fujitsu MBB2147RC Product Manual

CHAPTER 1
This chapter describes the feature and configuration of the hard disk drives (HDDs).
The HDDs are high performance large capacity 2.5-inch hard disk drives with an embedded Serial Attached
SCSI (SAS) controller.
The interface used to connect the HDDs to the host system complies with ANSI T10/1601-D Serial Attached
SCSI-1.1 (SAS-1.1), which covers items ranging from SAS physical layers to SCSI command protocols.
The high-speed data transfer and long-distance transmission capabilities of SAS technology and the powerful
command set the HDDs facilitate creation of high-performance and highly reliable disk subsystems with large
storage capacities.
1.1

Standard Features

(1) Compactness
The HDDs are a compact enclosure which complies with the 2.5-inch hard disk drive form factor.
(2) Environmental Protection
The HDDs comply with the Restriction of the use of certain Hazardous Substances in electrical and
electronic equipment (RoHS) directive issued by European Union (EU).
(3) SAS Standard
The HDDs are equipped with a serial attached SCSI (SAS) as a host interface.
Transfer rate: 1.5Gbps, 3.0Gbps
Number of SAS ports: Two
Full-duplex (simultaneous bidirectional data transfer) is supported.
C141-E257
General Description
1.1 Standard Features
1.2 Hardware Structure
1.3 System Configuration
13