Fujitsu D2799 Technical Manual page 19

– 1x USB connector for 3 USB connectors at the front side
– 2x USB connectors for USB tape drives
– 1x USB connector for internal USB stick
or
– 1x connector for USB Flash Module (optional)
– 1x connector for Trusted Platform Module (optional)
– 1x connector for second serial connector (COM2) in PCI slot
– 2x connectors for system fans (4 pin)
– 2x connectors for system fans (5 pin)
– 1x intrusion connector
External connectors
– 1x serial connector (COM1)
– 4x USB 2.0 connectors with 480 Mbit/s at the rear side
– 1x video connector (VGA)
– 1x RJ45 management LAN connector
– 1x RJ45 shared LAN connector
PCI slots
– 5x PCI-Express slots, all slots are mechanical x8:
– 2x PCIe x8 slots (Gen2), one slot is open on the right side to plug in a
x16 graphics card
– 2x PCIe x4 slots (Gen2)
– 1x PCIe x4 slot (Gen1)
– 1x PCI slot (32 bit / 33 MHz)
Server Management controller iRMC S2
– basic functionalities: fan control, voltage supervision for onboard voltages,
temperature monitoring, System Event Log and ASR&R (Automatic Server
Reconfiguration and Restart)
– PDA
– Global Error/CSS/ID LED
– HD LED support (SAS, SATA)
– Inventory Identification Control
– pre-failure warranty for memory
– CSS functionality
– power consumption control
– text console redirection
– Advanced Video Redirection - AVR
– remote storage
D2799 (TX200 S6)
Technical Manual
Overview
19