Fujitsu D2799 Technical Manual page 18

Overview
Chips on the system board
®
– Intel 5500 chip set
®
– Intel ICH10 Raid
®
– Intel 82574L Gigabit Ethernet controller
– 2 MB SPI flash (BIOS / iSCSI, PXE Bootcode)
– Server Management controller iRMC S2 with integrated graphic controller
– 16 MB SPI flash (code) for iRMC S2
– 2 MB SPI flash (data) for iRMC S2
– 32Mx16-667 DDR2 SRAM for iRMC S2
– SMSC8700 Fast Ethernet
– ADT7462 temperature/system monitoring controller
Graphic
– integrated VGA controller with PCIe x1 interface (Matrox G200)
– 8 MB graphic memory available via driver
– VESA compatible
LAN – Ethernet controller
®
– Intel 82574L Gigabit Ethernet controller
– PXE 2.0 and iSCSI boot support
– IPV6 header offloading
Storage devices
– 6x SATA2 (3 Gbit/s)
– 2x USB 2.0 (internal USB backup drives)
– 1x USB Flash Module
or
– 1x internal USB 2.0 memory stick
Internal connectors
– 1x SATA MLC1 connector (4 ports)
– 2x SATA connectors
2
– 1x I C signaling connector
– 1x ATX power connector 24 pin (12V, -12V, 5V, 3.3V and 5V auxiliary)
– 1x ATX power connector 8 pin (2x 12V)
– 1x ATX power connector 10 pin (1x 12V)
– 1x PC98 connector
– 1x front panel connector
18 Technical Manual
D2799 (TX200 S6)