Installing A Parallel Interface Cable - Fujitsu PRIMERGY TX100 S2 Options Manual

8.2

Installing a parallel interface cable

I
This feature is not available for the Japanese market.
Ê Open the server (see section
Ê Remove the screw from the slot cover for slot 1.
Ê Remove the slot cover.
V
CAUTION!
Keep the slot cover in a safe place. If you remove the parallel interface
again and do not replace it with a new one, then reinstall the slot cover
to comply with EMC regulations and to satisfy cooling requirements and
fire protection measures.
Figure 24: Extension of the slot cover
Ê Attach an extension bracket with one screw to the slot cover of the parallel
interface cable.
TX100 S2
Expansion cards and parallel interface
"Opening the server" on page
Options Guide
23).
47