Part Identification Chart - NordicTrack 23949.0 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M5 Washer
M8 Washer M10 Split 16mm Wave
(94)–2
Washer (105)–8 Washer (54)–2
(97)–8
M4 x 16mm
M8 x 38mm M8 Locknut
M8 x 13mm
Screw (101)–16
Screw (82)–8 Bolt (96)–4 (102)–4
M10 x 25mm M10 x 122mm
Screw (99)–4
Screw (104)–4
5