Part Identification Chart - NordicTrack 831.23897.0 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M6 x 13mm M8 Split M8 x 25mm x
M17 x 27mm
Washer (140)––8 Washer 1.5mm Washer
Wave Washer
(131)––8 (126)––4
(88)––4
M8 Locknut M4 x 16mm M6 x 12mm M6 x 50mm
(105)––6 Screw (93)––14 Screw (139)––4 Screw (62)––4
M8 x 16mm M8 x 25mm M8 x 45mm Bolt
Screw (102)––12 Screw (128)––2 (104)––6
M10 x 120mm
Screw (100)––4
5