NordicTrack 831.23897.0 User Manual page 14

17. Have a second person hold the Handlebar (10)
near the Upright (5).
See the inset drawing. Locate the Pulse Wire
(135) in the Handlebar (10). Insert the Pulse
Wire into the front of the Upright (5) and pull it
out of the hole in the Upright as shown.
Tie the end of the wire tie to the Upright Wire
(60), the Receiver Extension Wire (143), and the
Pulse Wire (135). Then, insert the other end of
the wire tie upward through the Handlebar (10).
Next, pull the upper end of the wire tie until the
Upright Wire, the Receiver Extension Wire, and
the Pulse Wire are routed through the Upright.
18. Tip: Avoid pinching the wires. Attach the
Handlebar (10) to the Upright (5) with two M8 x
16mm Screws (102).
17
Wire
Tie
60, 143,
135
18
102
14
10
135
10
5
Avoid pinching
the wires
10
5
5