Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kramer FC-32
Summary of Contents for Kramer FC-32
- Page 1 Kramer Electronics, Ltd. USER MANUAL Model: FC-32 DVI to PC/Component Converter...
-
Page 2: Table Of Contents
Connecting the FC-32 DVI to PC/Component Converter EDID Technical Specifications EDID Factory Default Data Figures Figure 1: FC-32 DVI to PC/Component Converter Functions Figure 2: Connecting the FC-32 DVI to PC/Component Converter Tables Table 1: FC-32 DVI to PC/Component Converter Functions Table 2: FC-32 Technical Specifications... -
Page 3: Introduction
Introduction Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have... -
Page 4: Quick Start
Getting Started Quick Start This quick start chart summarizes the basic setup and operation steps. KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 5: Overview
Overview Overview The FC-32 DVI to PC/Component Converter is a high-performance format converter for digital DVI-D signals. It converts a DVI-D input to a computer graphics or component video output on a 15-pin HD connection. The FC-32 features: • One DVI input on a 24-pin Molex connector •... -
Page 6: Your Fc-32 Dvi To Pc/Component Converter
Your FC-32 DVI to PC/Component Converter Your FC-32 DVI to PC/Component Converter Figure 1 Table 1 define the unit. Figure 1: FC-32 DVI to PC/Component Converter Functions Table 1: FC-32 DVI to PC/Component Converter Functions Feature Function DVI IN 24-pin Molex Connector... -
Page 7: Connecting The Fc-32 Dvi To Pc/Component Converter
The FC-32 is shipped with a fixed, factory default EDID (see Section 1 Switch off the power on each device before connecting it to your FC-32. After connecting your FC-32, switch on its power and then switch on the power on each device... -
Page 8: Technical Specifications
1 Specifications are subject to change without notice 2 VESA standard timing is supported. When the input timing does not comply to this standard, the FC-32 may not display correctly (for example, the pixel clock from a GeForce 6600 graphics card operating at 1600x1200 resolution is at 140MHz... - Page 9 EDID Factory Default Data (21) Maximum Horizontal Image Size: 88 cm (22) Maximum Vertical Image Size : 50 cm (23) Display Gamma : 2.20 (24) Power Management and Supported Feature(s): Standby, Suspend, Active Off/Very Low Power, RGB Color, sRGB, Preferred Timing Mode, Default GTF Supported (25-34) Color Characteristics...
- Page 10 : 0 Lines Digital Separate, Horizontal Polarity (+), Vertical Polarity (+) Modeline: "1600x1200" 162.000 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (126-127) Extension Flag and Checksum Extension Block(s) : 0 Checksum Value : 26 KRAMER: SIMPLE CREATIVE TECHNOLOGY...
- Page 11 EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
- Page 12 For the latest information on our products and a list of Kramer distributors visit www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the FC-32 and is the answer not in the manual?
Questions and answers