Kramer FC-4000 User Manual

Kramer FC-4000 User Manual

Standards converter / tbc

Advertisement

Quick Links

Kramer Electronics, Ltd.
USER MANUAL
Model:
FC-4000
Standards Converter / TBC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FC-4000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kramer FC-4000

  • Page 1 Kramer Electronics, Ltd. USER MANUAL Model: FC-4000 Standards Converter / TBC...
  • Page 3: Table Of Contents

    Figure 2: FC-4000 Standards Converter / TBC Connections Figure 3: SELECT Button Sequence Tables Table 1: Front Panel FC-4000 Standards Converter / TBC Features Table 2: Rear Panel FC-4000 Standards Converter / TBC Features Table 3: Technical Specifications of the FC-4000 Standards Converter / TBC Contents...
  • Page 4: Introduction

    Kramer line an integral part of the finest production and presentation facilities in the world. In recent years, Kramer has redesigned and upgraded most of the line, making the best even better!
  • Page 5: Your Standards Converter / Tbc

    Your Standards Converter / TBC Figure 1 illustrates the front and rear panels of the FC-4000. Tables 1 and 2 define the front and rear panels of the FC-4000, respectively. 1 The video input acts as a TBC and can GENLOCK to the sync of another video, therefore synchronizing the 2 asynchronous...
  • Page 6: Figure 1: Fc-4000 Standards Converter / Tbc

    Your Standards Converter / TBC Figure 1: FC-4000 Standards Converter / TBC...
  • Page 7: Table 1: Front Panel Fc-4000 Standards Converter / Tbc Features

    6 Reset all the CONTROLS to their default values by simultaneously pressing the + and – buttons for more than 3 seconds 7 The FC-4000 unit functions as a Standards Converter when no video source is connected to the GENLOCK IN connector...
  • Page 8: 4.1 Connecting The Standards Converter / Tbc

    2 Connect to the GENLOCK IN connector of the next unit in the line 3 Switch OFF the power on each device before connecting it to your FC-4000. After connecting your FC-4000, switch on its power and then switch on the power on each device...
  • Page 9: Operating Your Standards Converter / Tbc

    CONT (CONTRAST) and the BRIGHT (BRIGHTNESS) LEDs for HORIZONTAL PHASE to select either INPUT A or INPUT B. to select the desired input standard to select the desired output standard. COLOR Figure 3: SELECT Button Sequence H PHASE V PHASE KRAMER ELECTRONICS, LTD.
  • Page 10: Technical Specifications

    + button or - button to increase or decrease the current phase Technical Specifications Table 3 includes the technical specifications: Table 3: Technical Specifications of the FC-4000 Standards Converter / TBC Inputs: 2 Composite Video, 1Vpp/75 ohms on BNCs 2 Y/C (s-Video), 1Vpp/75 ohms (Y), 0.3Vpp/75 ohms (C) on 4P connectors...
  • Page 11 EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
  • Page 12 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com. Updates to this user manual may be found at http://www.kramerelectronics.com/manuals.html. We welcome your questions, comments and feedback. Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.com...

Table of Contents