HP c3000 Quickspecs page 17

Bladesystem c3000 enclosure

Hide thumbs Also See for c3000:

QuickSpecs

Configuration Information Factory Integrated Models

Step 5: Select Wall Outlet Power Cords

NOTE: Select one wall outlet power cord for each power supply when plugging the power supplies into a wall outlet.

NOTE:

NOTE: Wall Outlet power cords should only be used with low-line (100v to 110V) power sources. If high-line power outlets are

NOTE:

required, safety regulations require the use of a PDU or a UPS between the c3000 enclosures power supplies and wall outlets.

NOTE: A standard PDU power cord(c13 to C14) is included with each AC power supply, so these wall outlet power cords are not

NOTE:

required if you plan to plug the power supplies into a PDU or UPS.

Order the appropriate power cord for your countries standard electrical outlets.

Wall Outlet Power Cords Nema 5-15P to IEC320-C13, low voltage (6 ft/2 m), North America

Wall Outlet Power Cords

NOTE: HP Power cord (6 ft) 1.83 meter 10A C-13-UL domestic power cord, for

NOTE:

grounded USA 110V wall outlets.

Power Cord, C13,10A , 1.83m, Japan

NOTE:

NOTE: HP Power cord 2 meter C13 Japan low-line power cord, for Japanese 100V

wall outlets.

Power Cord, C20 C13, 15A, Universal Jumper, 2m

NOTE: For use with PDUs accepting C20 power cords.

NOTE:

DA - 12790

Worldwide — Version 12 — July 14, 2008

(For connection to standard wall outlets)

HP BladeSystem c3000 Enclosure

AF556A

AF572A

AF590A

Page 17

Table of Contents

Bladesystem c3000