HP c3000 Quickspecs page 12

QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem Power HP BladeSystem Power HP BladeSystem Power HP BladeSystem Power
Sizer Sizer Sizer Sizer
Service and Support Service and Support Service and Support Service and Support
The HP BladeSystem Power Sizer helps in sizing the power infrastructure needed for a HP BladeSystem
solution. This sizer enables effective planning for the power consumption and heat load of the
BladeSystem at its site.
The sizer enables you to:
Select the type and number of components within each Blade Server and Blade Enclosure.
View the effect of component changes on the power consumption and heat loading.
Review server loading and determine power supply and power subsystem requirements.
Approximate electrical and heat load for facilities planning purposes.
The sizing estimate is based on component level power measurements for a system stressed to maximum
capability.
Values obtained from the BladeSystem Sizer tool are measured with all components stressed to 100%
load and are intended for facilities planning purposes only. Actual power consumption varies with
application type, application utilization, and ambient temperature.
The p-class BladeSystem and the c-Class BladeSystem solutions are supported in the BladeSystem Power
Sizer.
Available at: http://www.hp.com/go/bladesystem/powercalculator
HP Care Pack services provide total care and support expertise with committed response designed to
meet your IT and business needs.
The HP Care Pack service for HP ProLiant BL c-Class server blades, cover the server blade and all HP
branded hardware options qualified for the server, purchased at the same time or afterwards, internal to
the server.
HP Care Pack services for the c7000 and c3000 enclosures cover the enclosure, power supplies and
fans. HP qualified rack options are covered by these services when installed within the same rack. HP
supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect
modules are also covered by the c7000 and c3000 enclosure Care Pack services.
NOTE: NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered under the c7000 and NOTE: NOTE:
c3000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care
Pack service level support should always be uplifted to match existing storage or server service level.
To fully capitalize on your HP BladeSystem servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of multi vender support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation HP has a HP BadeSystem server
support offer to help you speedily deploy and maximize system uptime.
Recommended Service Recommended Service Recommended Service Recommended Service – – – – Simplify ProLiant solution implementation, maintenance and management.
Support Service – – – – 4-Hour Response Coverage, 3-Year, 24 x 7, Same Business Day Support Service Support Service Support Service
Deployment Service Deployment Service Deployment Service – – – – Installation and Start Up for HP BladeSystem Infrastructure Deployment Service
Enhanced Service Enhanced Service Enhanced Service – – – – Optimize service level to increase IT performance and availability Enhanced Service
Support Service – – – – HP Proactive BladeSystem Service, 1-Year Support Service Support Service Support Service
DA - 12790 Worldwide — Version 12 — July 14, 2008
HP BladeSystem c3000 Enclosure HP BladeSystem c3000 Enclosure HP BladeSystem c3000 Enclosure HP BladeSystem c3000 Enclosure
Page 12