Multi Picture Mode - Hitachi L37X01AU User Manual

FUNCTION (continued)
Size Switching (continued)
RGB signal input
You can select a suitable size depending on the resolution.
Full 4:3
Display Area Selection Diagram
Resolution
640 x 400 (VGA)
640 x 480 (VGA)
800 x 600 (SVGA)
1024 x 768 (XGA)
1280 x 768 (WXGA)
1280 x 1024 (SXGA)
1360 x 768 (WXGA)

Multi Picture Mode

With this feature, you can watch different channels simultaneously on one screen in several ways.
As for the available signals, please refer to "Recommended Signal List" on
Activate the Multi Picture Mode in HDMI Mode
To activate Multi Picture mode in either TV, AV, HDMI, and RGB mode, press
the remote control.
2-picture mode
You can watch two different pictures side by side.
This mode is available in both TV mode and AV mode ( AV1~4 Input).
Control on the side with Speaker Icon
Audio is output from the selected picture with the speaker icon.
Switch the Input modes (HDMI1~3) on the Main-Screen.
Switch the Input modes (DTT/TV and AV1~4) or change
Channels on the Sub-Screen.
1. To shift the speaker icon
The speaker icon
2. To change the channel of the of the Sub -Screen
Make sure that
Press to select channels.
3. To change the Input mode of the Sub -Screen
Make sure that the speaker icon is located next to the Input mode indication of
the Sub -Screen
Press Input Select buttons on the remote control. ( DTV/TV , AV1~4 are available)
NOTE
The message " Not Available" will be appeared on the screen when the
combinations of the Input modes are not acceptable.
(See the Table below for details.)
47
Full
, press button.
will be shifted from A to B back-and-forth.
mark is located on the Sub -Screen.
4:3
57 58
, .
on
The selected picture with speaker icon
HDMI
A
B
Main-Screen Sub-Screen
1