Installing Channels; Restoring Channels - Hitachi L37X01AU User Manual

DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)

Installing Channels

You can search available channels in any of the following 3 methods.
1. Press button on the remote control in DTT mode.
2. Select "Installation", on the DTT main menu with
3. The password is required to enter the Installation menu. The initial password is 0000.
4. You can select either of the followings by pressing
Manual scan:
Searches by individual settings manually.
The box shown on the right appears. Fill out the following 4 items as needed.
Use
Channel
(Ch2-Ch69) *In case of tuning Ch9A, select Ch2
num
(Frequency: 205.5MHz.).
Frequency Use numeric button to enter the frequency.
Select either 7MHz or 8MHz by using
Bandwidth
7MHz normally.
Select High or Low by using
Priority
normally.
Then, press button on "Start scan" of "Manual scan" column. If it finds a
channel, "Success" shows up. If not, "Timeout error" is displayed.
Quick scan:
Searches channels of the selected area.
The list of the area shows up. Select one of those with
button.
NOTE
If you are uncertain about the area, please select "Auto scan" method or contact
the local dealer in your area.
Auto scan:
Searches every channel.
The message "Auto scan will take more than 10 minutes. Do you want to
continue?"
Select "Yes" and press

Restoring Channels

This restores the all channel settings.
1. Press button on the remote control in DTT mode.
2. Select "Installation", on the DTT main menu with
3. The password is required to enter the Installation menu. The initial password is 0000.
4. Select "Restore default" and press
would be lost" appears. Select "Yes" and press
NOTE
The password will return to the default setting when activating "Restore
default"
buttons or numeric button to enter the number.
button to precede it.
buttons and press
button. The message "All setting
buttons and press button.
button.
buttons. Set to
buttons. Set to High
buttons and press
button.
button.
Installation
Channel num
Frequency
Manual scan
Bandwidth
Quick scan
Priority
Auto scan
Manual scan Start scan
Restore default
Installation
Adelaide
Manual scan
Brisbane
Quick scan
Melbourne
Auto scan Perth
Restore default Sydney
Batchelor
Canberra
Darwin
Press to select city.
Installation
Auto scan will take more
than 10 minutes.
Manual scan
Do you want to continue?
Quick scan
Yes
Auto scan
Restore default
Installation
All setting would be lost.
Manual scan
Yes
Quick scan
Auto scan
Restore default
6
177500KHz
7 MHz
High
Exit
Exit
40