Change Pin; Local Time; Checking Dtt System Information; Jump To Tv Setup Menu - Hitachi L37X01AU User Manual

DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)

Change Pin

To use the locks effectively, do change the pin number from the default setting,
which should be known and remembered only by you. The default setting is
0000.
1. Press button on the remote control.
2. Select "General setting" and press
3. Select "Change pin" and
4. The box appears to fill out the old and new password, and the confirmation
of the new password.
5. Use the numeric number to enter.
NOTE
In case that you forget your password, please refer to Troubleshooting on

Local Time

Make sure to select your resident area to set up the correct local time.
1. Press button on the remote control.
2. Select "General setting" and press
3. Select "Local time" and
4. With buttons, select the area and press

Checking DTT System Information

This can display current DTT system information.
1. Press button on the remote control.
2. Select "System" and press
3. Pressing button on "Status" shows up System information.
(H/W version, S/W version, and Release time)

Jump to TV Setup Menu

"TV Setup" menu can be accessed from the DTT main menu.
It jumps to the TV main menu containing Analog TV function, such as Picture
menu and Audio menu.
Refer to
26 37
~
45
button.
button.
button.
button.
button.
regarding the setting form the details.
52
button.
General settings Old password
New password
Option setup
Change pin
Confirm new password
Local time
Subtitle setting
General settings
Current time zone
Greenwich mean time
Option setup
Change pin Adelaide, Aust.
Local time
Brisbane, Aust.
Subtitle setting
Canberra, Aust.
Audio setting
Darwin, Aust.
Melbourne, Aust.
Perth, Aust.
Sydney, Aust.
Tasmania, Aust.
Press to select. Then press [OK].
System
Status System information
H/W Version : H2-DT640HD
S/W Version : 1.2.0
Release time : JUL 27 2007 21:06:23
System information. Press [Return] to return.
*The above is an example
Picture
Audio
Timer
Setup
Select Set
OK