Emotiva Pro Stealth DC-1 User Manual page 21

Stealth DC-1 Stereo D/A Converter - Operator's Manual
SETUP: SRC
Enables and disables the ASRC (asynchronous sample rate converter) in the
Stealth DC-1. The advanced ASRC implementation in the DC-1 re-clocks the incoming
data to a clean clock without changing the sample rate, so you get to hear your original
music - bit perfect - but minus the jitter.
You might wish to disable the ASRC in order to hear what the original source signal
sounds like - including the jitter that is present.
Options are: Asynchronous (ASRC Enabled), Synchronous (ASRC Disabled)
SETUP: MUTE LEVEL
When you press the Mute button on the DC-1 remote control, the main and headphone
levels are changed to a fixed (configurable) mute level. This option lets you configure
that level.
Options are: Silent (the default), -20 dB, and -40 dB
Note: The mute function changes the output level to a fixed - preset - level
(the -20 and -40 dB settings are relative to full Volume), if you engage mute
while playing the DC-1 at a very low level, the result may actually be an
increase in output level.
SETUP: OUTPUT MODE
When used as a preamp, the DC-1 is normally configured to have a variable output
level; when configured as a DAC, you may wish to configure a fixed output level.
Options are: Variable, Fixed
SETUP: USB MODE
The USB input on the DC-1 can be configured to operate in USB 1.1 or USB 2.0 mode.
Selecting USB 1.1 mode may enable the DC-1 to connect to some legacy devices, but
is not recommended for best performance. [This is NOT the same as USB Audio Class 1
(UAC1) and USB Audio Class 2 (UAC2).]
Options are: USB 2.0, USB 1.1
SETUP: INFO
This option displays the current version number of the main firmware on the DC-1
(there are no options).
SETUP: EXIT
This option allows you to manually exit the Setup Menu.
Page 17