Setup Menu - Emotiva Pro Stealth DC-1 User Manual

Stealth DC-1 Stereo D/A Converter - Operator's Manual

Setup Menu

The advanced features on the Stealth DC-1 are accessed via the Setup Menu, which is
accessed by pressing the Input / Menu encoder knob.
Press the knob once to enter the menu system; the top line of the display will change
to "SETUP" (the bottom line will display the current Setup Menu item).
Turn the knob to select the item you wish to configure, then press the knob to select it.
The top line of the display will change to the name of the item you selected, and the
bottom line will display the available options - one at a time. A bright triangle will
appear to the left of the option that is currently selected. To change the selection, press
the knob when the choice you want is showing (the bright triangle will appear to the
left of it).
At this point you may turn the knob again until "RETURN" is displayed and press the
knob - or simply wait (the menu will time out and return to the standard operating
display after several seconds).
Note: The bright triangle to the left indicates the currently active option. once
you press the knob and the bright triangle appears to the left of your choice,
your change is "committed" (it will take effect whether you exit the menu
actively or simply allow the menu to time out).
Here's an example:
We'll change the Mute Level to Silent.
1) Press the Menu knob once; "SETUP" is displayed on the top line of the display.
2) Turn the knob until "MUTE LEVEL" is displayed on the bottom line of the display.
3) Press the knob; "MUTE LEVEL" is now displayed on the top line of the display.
4) Turn the knob until "SILENT" is displayed on the bottom line of the display.
5) Press the knob; a bright triangle appears to the left of "SILENT" indicating that it is
the active choice (if SILENT was already the active choice, then the bright triangle was
already next to it).
At this point we can either turn the knob until "RETURN" is displayed on bottom line
of the display, then press the knob again - which will bring us back to the main menu
level where we can select something else to change - or simply wait for the menu to
leave setup mode after a few seconds. From the main menu level, simply select "EXIT"
and press enter to leave the Setup Menu.
Page 16