Quick Start - Emotiva Pro Stealth DC-1 User Manual

Stealth DC-1 Stereo D/A Converter - Operator's Manual

Quick Start

Even though you may be eager to try out your Stealth DC-1 right away, there are a few
important details you need to check first:
1) Verify that the proper AC line voltage is selected on the red switch on the bottom of
your Stealth DC-1 unit. (See Configuring the proper AC line voltage in the Hardware
Configuration section.)
2) Remove the insulator tab from the batteries in the remote control. (See Inserting or
changing batteries in the remote control in the Hardware Configuration section.)
3) If you are connecting a Windows computer to the DC-1 using the USB input,
download and install the Windows USB drivers (See the USB Drivers section).
4) Verify that your source components are all delivering stereo PCM signals to the DC-1
(some Blu-Ray players, digital recorders, cable boxes, or other digital player
components may need to be configured for this option).
5) If you plan to use the volume control on the DC-1, verify that the DC-1 is configured
to provide a variable level output.
6) Remember to turn on your Stealth DC-1 using the front panel Volume / Standby
knob after activating the rear panel AC Main Power switch.
Page 7