Digital Inputs - Emotiva Pro Stealth DC-1 User Manual

Stealth DC-1 Stereo D/A Converter - Operator's Manual
The Stealth DC-1 Stereo 24-192 Balanced DAC (Rear Panel)
1 2
L L
UN BALANCED
R R
ANALOG INPUT
1. Unbalanced Analog Inputs (one stereo pair)
These inputs accept a stereo analog signal, and may be used to connect the output of a
phono preamp or other piece of legacy equipment to the Stealth DC-1.
2. Unbalanced Outputs (analog, one stereo pair, consumer level)
These outputs deliver a standard unbalanced analog output signal. Outputs may
be either fixed or variable level, depending on the setting you have chosen in the
Configuration Menu. See the section entitled Setup Menu for details.
3. Balanced Outputs (analog, one stereo pair, pro level)
These outputs deliver a standard "pro level" balanced analog output signal. Outputs
may be either fixed or variable level, depending on the setting you have chosen in the
Configuration Menu. See the section entitled Setup Menu for details.
Note: Both unbalanced and balanced outputs are active at the same time and
are governed by the same Volume setting.

Digital Inputs

The stealth DC-1 is a stereo pCm DAC. Do NoT connect multi-channel pCm,
DsD, or bitstream (digital surround) sources to any input on the stealth DC-1.
Connecting any signal other than a stereo pCm signal to any input on the DC-1
may produce unpredictable results.
All digital inputs on the stealth DC-1 (including UsB) can accept 44.1k, 48k,
88.2k, 96k, 176.4k, and 192k sample rates, at both 16 bit and 24 bit word
lengths.
3
R BALANCED L
OUTPUTS
4 5
COAX BNC
AES/EBU OPT USB
DIGITAL INPUTS
Page 10
6 7
POWER