DURKOPP ADLER 888 Instruction Manual page 79

CLASSIC-machines
Additional instructions: Machines with integrated motor - version 00.0 - dated 10/2012
CLASSIC-machines
. Operation
Fig. 3: Switching CLASSIC-machines on and off
Operating panel on the
machine post
(1) - LEDs indicating the status
CLASSIC-machines are switched on and off at the control under-
neath the table top ( instruction manual).
The two LEDs (1) on the machine post indicate the status of the
power supply.
• Main switch (3) for the power supply is pressed:
Both status indicating LEDs (1) are lit:
The machine is ready for sewing and the sewing light is
energized.
• Switch for the sewing light (2) is pressed:
Only the top one of the two status-indicating LEDs (1) is lit:
The sewing light energized, but the machine is not ready
for sewing.
Control beneath the table
top
1
(2) - Button for the sewing light
(3) - Main switch for power supply
(4) - Control light
2
3
4
4