DURKOPP ADLER 888 Instruction Manual page 78

ECO-machines
Additional instructions: Machines with integrated motor - version 00.0 - dated 10/2012
Fig. 2: Operator settings with ECO-machines
Setting the maximum speed
1. Turn the potentiometer P1 (1).
• To decrease the speed: Turn counter-clockwise.
• To increase the speed: Turn clockwise
The initial value is the maximum speed defined for this machine
class. It cannot be increased, only decreased.
 This setting will be memorized and will also be valid after
restarting the machine.
Switching the needle's lifted position at sewing stop on / off
1. Press button S1 (2).
The LED above button S1 is lit:
At sewing stop the needle will be lifted to top position.
2. Press button S1 (2) again.
The LED above button S1 goes out:
The needle's lifted position at sewing stop is switched off.
 The respective setting will be memorized and will also be
valid after restarting the machine.
Switching the softstart on and off
1. Press button S2 (3).
The LED above the button S2 is lit:
Sewing start with softstart.
2. Press button S2 (3) again.
The LED above the button S2 goes out. Sewing start with-
out softstart.
 The respective setting will be memorized and will also be
valid after restarting the machine.
1
(1) - Potentiometer P1
to decrease the speed
2
(2) - Button S1
for the needle's stopping position
(3) - Button S2
3
for the softstart
3