Paper Eject - Brother DCP-7030 Service Manual

3.2.4 Paper Eject

Toner on paper is fused by the heat roller and pressure roller of the fuser unit. Paper moves
along the outer chute and is ejected into the face-down output tray from the eject roller 2 with
its print side down.
Fuser unit
Memo :
When a paper jam is detected near the eject actuator, the main motor reverses to move the
gears out of engagement. The eject roller 2 become free, allowing the paper jam to be
cleared.
<Operation of Actuators>
• The eject actuator detects whether or not paper is ejected from the fuser unit.
Heat roller Pressure roller
Fig. Ref. 2-10
Ref. 2-9
Eject roller 2
Outer chute
Eject actuator
Confidential