Removing A Pc Card Or Blank - Dell Latitude C640 User Manual

The computer recognizes most PC Cards and automatically loads the appropriate device driver. If the
configuration program tells you to load the manufacturer's drivers, use the floppy disk or CD that came with
the PC Card.

Removing a PC Card or Blank

NOTICE: Use the PC Card configuration utility on the taskbar to select a card and stop it from
functioning before you remove it from the computer. If you do not stop the card in the configuration
utility, you could lose data. Do not attempt to eject a card by pulling its cable, if one is attached.
For a push-button latch, press the latch and gently remove the card or blank. (For some push-button
latches, you must press the latch twice: once to pop the latch out, and then a second time to pop the card
out.)
For a rotating latch:
1. Rotate the latch outward.
2. Press in on the end of the latch.
3. Gently remove the card.
Save a blank to use when no PC Card is installed in a slot. Blanks protect unused slots from dust and other
particles.