Test Switch - Brother MFC-8420 User Manual

Link/Speed LED is green: 10 BASE T Ethernet
This Link/Speed LED will be green if the print server is connected to
a 10 BASE T Ethernet.
Active LED is yellow:
The Active LED will blink if the print server is receiving or transmitting
data.
If there is a valid connection to the network, the LED will blink
orange or green.

TEST SWITCH

Short push: Prints the network configuration page.
Long push (more than 5 seconds): Reset the network configuration
back to the factory default settings.
To set up the MFC on the Network, see the NC-9100h Network
User's Guide on the CD-ROM.
23 - 10 OPTIONAL ACCESSORIES
Test
Switch
LED
Ethernet
RJ-45
LED