19
Network Scanning
(Windows
To use the MFC as a Network Scanner, the NC-9100h Network
board should be installed into the MFC and configured with TCP/IP
and mail server settings if you use Scan to E-mail (E-mail server).
You can set or change NC-9100h settings from the control panel or
with the Professional utility or Web Management BRAdmin. (Please
see the NC-9100h User's Guide on the CD-ROM.)
Registering your PC with the MFC
If you need to change the MFC that was registered to your PC during
the installation of MFL-Pro (see the Quick Setup Guide on page 38),
follow the steps below.
1
For Windows
From the Start menu, select Control Panel, Scanners and
Cameras, and then right-click Scanner Device icon and select
Properties to view the Network Scanner Properties dialog box.
For Windows
From the Start menu, select Control Panel, Printers and
Other Hardware, Scanner and Cameras (or Control Panel,
Scanners and Cameras).
19 - 1 NETWORK SCANNING
®
98/98SE/Me/2000 Professional and XP only)
®
98/Me/2000
®
XP